ADAS target boards | for Q.Lign16902000131690200013
For ADAS calibration in combination with Q.Lign. Target boards can be permanently installed on the ADAS calibration tool.
Scope of delivery:
- 2x ADAS target boards (Coding ID #5 and #6)
- 2x target covers
Compatible with BBFAS1000 and most third-party ADAS calibration tool solutions.
Adapter set Q.Grip | for Q.Lign | 4 pcs.16901010101690101010
Q.Grip: The closest you will get to Touchless.
- Mounting of targets in under 5 seconds
- No rim contact, no scratches or damages!
- Instantaneously change between different tyre diameters with our new patented clamping mechanism
- Three arms guarantee safe and precise grip during the complete alignment
- No removal of hubcaps!
- No knob twisting!
- No fixed wheel assignment, position on any wheel!
- Clamping range: 525-835mm / 20.6"-32.8" (wheel diameter)
Power connection cable 10 m16902030251690203025
Power connection cable 15 m16902030411690203041
Duo-battery charging station for Q.Lign | incl. accessories16902010691690201069
Battery for Q.Lign | Li-Ion | 99 Wh16902030531690203053
Power supply for Q.Lign Accessories | 19 V RRC16937706481693770648
For battery charging station and emergency power supply box of Q.Lign
Emergency power box for Q.Lign16902010301690201030
- Power supply of sensor heads in case of battery failure
- Mobile use without fixed installation
- Connection to sensor heads via 10 m (1690203025) or 15 m cable (1690203041)
Note: Operation additionally requires the 19 V power supply (1693770648) which is included in the battery-powered Q.Lign scope of deliveries.
Lift adaptation for Q.Lign16902010351690201035
Tablet | Android | 10.1"16937706441693770644
Wall board for Q.Lign16902010541690201054
Printer for Beissbarth trolleys16937704151693770415
Trolley with 27"monitor | for Q.Lign16902010551690201055
Scope of delivery: - Trolley - Monitor arm - 27" monitor
Electronic aluminum turntable without connecting cable | Standard16904010111690401011
- Enables full steering lock on CCD, Touchless and Q.Lign wheel aligner
- Very high quality and lifetime in workshop environment
- Standard turntable without connecting cable
Electronic aluminum turntable without connecting cable | Precision16904010131690401013
- Enables full steering lock on CCD, Touchless and Q.Lign wheel aligners
- Very high quality and lifetime in workshop environment
- Precision turntable without connecting cable
- Steel balls for minimal friction and maximum precision
Mechanical aluminum turntable Standard16905010011690501001
- Very high quality and lifetime in workshop environment
Mechanical aluminum turntable Precision16904010281690401028
- Very high quality and lifetime in workshop environment
- Steel balls for minimal friction and maximum precision
Connecting cable for electronic turntables16904030011690403001
- Connecting cable between electronic turntables and sensor head
- Enables full steering lock on CCD and Touchless aligner
Protective rubber cover for aluminum turntable16904020011690402001
- Additional protection from dirt and liquids
Drive-on ramps for two aluminum turntables16907010521690701052
- Drive-on ramps for turntables including connecting piece and drive off protection
- Enables rolling compensation on lifts without embedded turntables
Drive-on ramps for turntables and sliding plates16904010081690401008
- Set of Drive-on ramps for turntables and sliding plates
- Suitable for lifts without cutouts for turntables or sliding plates, e.g. MOT lifts
Sliding plate for rear axle | short16904010031690401003
Sliding plate for rear axle | long16904010041690401004
Magnetic clamps for wheel bolts | 75mm16907015081690701508
- Quick and gentle attachment on wheel bolts instead of the rim
- Secure and central hold for ultimate precision
- Suited for 3/4/5/6 hole rims
Magnetic clamps for wheel bolts | 100mm16907015211690701521
- Quick and gentle attachment on wheel bolts instead of the rim
- Secure and central hold for ultimate precision
- Suited for 3/4/5/6 hole rims
Self-centering quick clamp for Porsche16903800101690380010
- Attaches to the center hole of the rim
- Quick and secure mounting on the vehicle
- Reduces clamping errors
- Official VW special tool: VAS 6918
- Not suited for Porsche vehicles with center wheel bolt!
Self-centering quick clamp for Tesla16903801611690380161
- Attaches to the center hole of the rim
- Quick and secure mounting on the vehicle
- Reduces clamping errors
Self-centering quick clamp for Ferrari16903812991690381299
- Attaches to the center hole of the rim
- Quick and secure mounting on the vehicle
- Reduces clamping errors
- Used for wheel alignment and radar calibration
- Wheel alignment requires 2 sets (4 clamps in total)
- Radar calibration requires 1 set (2 clamps in total)
Central clamp Porsche Carrera GT16903010021690301002
- Quick and secure mounting on the vehicle
- Reduces clamping errors
- Official VW special tool: VAG 6828
Central clamp Porsche 911 GT3 and Turbo16903800021690380002
- Special tool for Porsche 911 Turbo since 2009 and Porsche 911 GT3 since 2010
- Quick and secure mounting on the vehicle
- Reduces clamping errors
- Official VW special tool: VAS 6830
Quick clamp Mercedes-Benz | OEM16908010021690801002
- Distance pins sit directly on the wheel hub, a runout compensation is therefore not necessary
- Quick and secure mounting on the vehicles
- For ultimate precision
- Only suited for CCD and Q.Lign systems
- For wheel diameters up to 850mm
- For original Mercedes-Benz rims with pin hole pattern 5x125mm and 5x160mm
Quick clamp BMW | OEM16908010011690801001
- Distance pins sit directly on the wheel hub, a runout compensation is therefore not necessary
- Quick and secure mounting on the vehicles
- For ultimate precision
- Homologated for BMW
- Only suited for CCD and Q.Lign systems
- Für Raddurchmesser bis 850mm
- For original BMW rims with 4x100mm and 5x120mm pin hole pattern
Multi-Fit wheel clamp with standard claws | 13 - 22" | 4 pcs.16903111121690311112
- High quality claws for gentle attachment to rims
- Torque control for strong hold without deforming the rim
Multi-Fit wheel clamp with standard claws | 13 - 22" | 1pc.16903110891690311089
- High quality claws for gentle attachment to rims
- Torque control for strong hold without deforming the rim
Set softline claws for 1 x Multi-fit clamp | Softline rims16903111641690311164
Set truck claws for 1 x Multi-fit clamp | Truck16903111151690311115
For convex wheels mounted to a double-bearing hub and dually wheels.
Length: 10cm
Extension set for Multi-fit clamps | 23 - 28"16903111131690311113
Distance bolts for quick clamp Mercedes Benz | 100 mm16908010071690801007
Distance bolts for quick clamp BMW | 120 mm16908010031690801003
Distance bolts for quick clamp Mercedes Benz and BMW | 125 mm16904010191690401019
Dust cover target board | Q.Lign16902021551690202155
Scope of delivery: 1x protective cover
Storage kit | for 4x Q.Grip16908010481690801048
Can be either mounted to the wall or to the post of the Q.Lign T.41 wheel aligner. The storage kit holds 2x2 Q.Grip clamps. Can be positioned on each side of the vehicle for maximum efficiency.
