- Very high quality and lifetime in workshop environment
Ultimate productivity - vehicle after vehicle
The Q.Lign 360 builds on the existing Q.Lign platform and focuses entirely on wheel alignment. With Q.Lign 360, workshops raise the bar even higher and can thus exploit their full service potential.
Measuring at the highest level
- Camera beam measures permanently from a height of 2.8 meters
- No motor, no winch, no wear and tear
- No up, no down, no injuries or damage
- No movement, no matter if short or long wheelbases
Everything perfectly in sight
- Four wheels, four cameras
- Separate camera for the rear axle for more accurate toe values on the front axle
- Install anywhere within 1.8 to 3.3 meters of the front axle
- Measure and adjust from 0 to 2 meters platform height at any time
Work smarter, not harder
- Measurement starts directly with attachment of the targets to quickly determine accident vehicles
- All targets work on any wheel reduces setup times and setup errors
- Active MEMS Technology: Constant measurement against gravity for uncompromising accuracy
- Caster sweep at floor level without the need for a stool or ladder
- Access to clear and easy-to-understand PDF reports from anywhere inside your shop
The world's first web-based wheel aligner
- Eliminates need for trolley and PC and creates more space
- Incredibly efficient with up to 95% power savings compared to PC-based systems
- Stream-to-X: Access software on any TV, PC, laptop, tablet or smartphone
- Intuitive software, streamlined operations, more productivity
- Easy integration of Q.Lign into your shop's daily processes and systems
Full speed, without compromising on precision
- Powerful software with optimized workflow for the entire wheel alignment process
- Reduced runout process for more productivity
- 3D camera technology produces highly accurate realtime measurements
Space requirement
- Minimum height of 2800mm
- Minimum clearance of 2800mm on four-post lifts
- Camera beam with 4 cameras
- Q.Lign display module
- 4x targets with AutoID
- Tablet
- Brake lock and steering wheel lock
- Powerbox for power supply
- Key Card for international vehicle specs
Note: For the kit version, turnplates and wheel clamps must be ordered separately, depending on customer requirements.
| Electrical connection | 90-264V | 1Ph | 47-63Hz |
|---|---|
| Packaging length | 2960 mm |
| Packaging width | 860 mm |
| Packaging height | 480 mm |
| Gross weight | 60 kg |
| Measuring system | 3D mit Messbalken (fixiert) |
| Weight | 60 kg |
| Packaging unit | 1 Piece(s) |
| Space requirement width | 2595 mm |
| Data transmission type | kabellos |
| Distance camera - center of turntable | 1800 - 3300 mm |
| Clearance front posts of lift min. | 2800 mm |
| Display size | 10 Inch |
| Power consumption | 45 W |
| Sensor count | 4 Piece(s) |
| Wheel base | 1750 - 4600 mm |
| Set-up height | 2800 mm |
| Electrical connection | 90-264V | 1Ph | 47-63Hz |
|---|---|
| Packaging length | 2960 mm |
| Packaging width | 860 mm |
| Packaging height | 480 mm |
| Gross weight | 60 kg |
| Measuring system | 3D mit Messbalken (fixiert) |
| Weight | 60 kg |
| Packaging unit | 1 Piece(s) |
| Space requirement width | 2595 mm |
| Data transmission type | kabellos |
|---|---|
| Distance camera - center of turntable | 1800 - 3300 mm |
| Clearance front posts of lift min. | 2800 mm |
| Display size | 10 Inch |
| Power consumption | 45 W |
| Sensor count | 4 Piece(s) |
| Wheel base | 1750 - 4600 mm |
| Set-up height | 2800 mm |
-
Mechanical aluminum turntable Standard 1690501001 1690501001
-
Magnetic clamps for wheel bolts | 75mm 1690701508 1690701508
- Quick and gentle attachment on wheel bolts instead of the rim
- Secure and central hold for ultimate precision
- Suited for 3/4/5/6 hole rims
-
Magnetic clamps for wheel bolts | 100mm 1690701521 1690701521
- Quick and gentle attachment on wheel bolts instead of the rim
- Secure and central hold for ultimate precision
- Suited for 3/4/5/6 hole rims
-
Storage kit | for 4x Q.Grip 1690801048 1690801048
Can be either mounted to the wall or to the post of the Q.Lign T.41 wheel aligner. The storage kit holds 2x2 Q.Grip clamps. Can be positioned on each side of the vehicle for maximum efficiency.
-
Storage kit | for 4x MultiFit 1690801047 1690801047
Can be either mounted to the wall or to the post of the Q.Lign T.41 wheel aligner. The storage kit holds 2x2 MultiFit clamps. Can be positioned on each side of the vehicle for maximum efficiency.
-
Wall mount | Q.Lign T-Series | 515-880mm 1690801053 1690801053
Extendable wall bracket for mounting the Q.Lign T-series camera beam. Enables distances of up to 4170 mm from the center of the turntable to the wall.
-
Filling piece (1x) for aluminum turntable 1690102211 1690102211
-
Mounting set for MultiFit (4x) | for wall installation 1690101094 1690101094
-
Mounting set for OE quick clamps (4x) | for wall installation 1690101090 1690101090
-
Mounting set for brake and steering wheel lock (2x) | for wall installation 1690101089 1690101089
-
Accessory cart | for OE quick clamps 1690101127 1690101127
For storing 4x OE quick clamps, brake locks, and steering wheel locks
-
Accessory cart | MultiFit clamps 1690101129 1690101129
For storing 4x MultiFit clamps, brake locks, and steering wheel locks
-
Vehicle database update Q.Lign | Key Card 1690002022 1690002022
- Access to the newest vehicles specs directly from the OEM
- Authorises the licensing of all IAM vehicle databases for the calender year in which the Key Card has been activated
-
Accessory Cart | for Magnetic Clamps 1690101128 1690101128
For storing 4x magnetic clamps, brake lock, and steering wheel lock
-
Bracket set for magnetic clamps (4x) | for wall installation 1690101092 1690101092
-
ProClamp wheel clamp | 13 - 23" | 1 pc 1690100001 1690100001
- Rim clamping range: 12 - 23"
- Wheel clamping range: 490 - 884mm
-
Self-centering quick clamp | for Lamborghini 8900380016 8900380016
- Attaches to the center bolt of the rim
- Quick and secure mounting on the vehicle
- Reduces clamping errors
-
Mechanical aluminum turntable Precision 1690401028 1690401028
- Very high quality and lifetime in workshop environment
- Steel balls for minimal friction and maximum precision
-
Multi-Fit wheel clamp with standard claws | 13 - 22" | 4 pcs. 1690311112 1690311112
- High quality claws for gentle attachment to rims
- Torque control for strong hold without deforming the rim
-
Extension set for Multi-fit clamps | 23 - 28" 1690311113 1690311113
-
Electronic aluminum turntable without connecting cable | Standard 1690401011 1690401011
- Enables full steering lock on CCD and Touchless aligner
- Very high quality and lifetime in workshop environment
- Standard turntable without connecting cable
-
Electronic aluminum turntable without connecting cable | Precision 1690401013 1690401013
- Enables full steering lock on CCD and Touchless aligner
- Very high quality and lifetime in workshop environment
- Precision turntable without connecting cable
- Steel balls for minimal friction and maximum precision
-
Central Clamp VAG 6828 | Porsche Carrera GT 1690301002 1690301002
- Quick and secure mounting on the vehicle
- Reduces clamping errors
- Official VW special tool: VAG 6828
-
Central Clamp VAS 6830 | Porsche 911 GT3 and Turbo ASE 485 233 00 000 ASE 485 233 00 000
- Special tool for Porsche 911 Turbo since 2009 and Porsche 911 GT3 since 2010
- Quick and secure mounting on the vehicle
- Reduces clamping errors
- Official VW special tool: VAS 6830
-
Self-centering quick clamp VAS 6918 for Porsche ASE 485 237 00 000 ASE 485 237 00 000
- Attaches to the center hole of the rim
- Quick and secure mounting on the vehicle
- Reduces clamping errors
- Official VW special tool: VAS 6918
- Not suited for Porsche vehicles with center wheel bolt!
-
Self-centering quick clamp for Tesla 1690380161 1690380161
- Attaches to the center hole of the rim
- Quick and secure mounting on the vehicle
- Reduces clamping errors
-
Self-centering quick clamp for Ferrari 1690381299 1690381299
- Attaches to the center hole of the rim
- Quick and secure mounting on the vehicle
- Reduces clamping errors
- Used for wheel alignment and radar calibration - Wheel alignment requires 2 sets (4 clamps in total) - Radar calibration requires 1 set (2 clamps in total)
-
Quick clamp Mercedes-Benz | OEM 1690801002 1690801002
- Distance pins sit directly on the wheel hub, a runout compensation is therefore not necessary
- Quick and secure mounting on the vehicles
- For ultimate precision
- Only suited for CCD and Q.Lign systems
- For wheel diameters up to 850mm
- For original Mercedes-Benz rims with pin hole pattern 5x125mm and 5x160mm
-
Quick clamp BMW | OEM 1690801001 1690801001
- Distance pins sit directly on the wheel hub, a runout compensation is therefore not necessary
- Quick and secure mounting on the vehicles
- For ultimate precision
- Homologated for BMW
- Only suited for CCD and Q.Lign systems
- Für Raddurchmesser bis 850mm
- For original BMW rims with 4x100mm and 5x120mm pin hole pattern
-
Adapter set Q.Grip | for Q.Lign | 4 pcs. 1690101010 1690101010
Q.Grip: The closest you will get to Touchless.
- Mounting of targets in under 5 seconds
- No rim contact, no scratches or damages!
- Instantaneously change between different tyre diameters with our new patented clamping mechanism
- Three arms guarantee safe and precise grip during the complete alignment
- No removal of hubcaps!
- No knob twisting!
- No fixed wheel assignment, position on any wheel!
- Clamping range: 525-835mm / 20.6"-32.8" (wheel diameter)
-
Self-centering quick clamp VAS 6829 for Porsche ASE 485 232 00 000 ASE 485 232 00 000
- Attaches to the center hole of the rim
- Quick and secure mounting on the vehicle
- Reduces clamping errors
- Official VW special tool: VAS 6829
- Not suited for Porsche vehicles with center wheel bolt!
-
Filling piece for aluminum precision turntable 1690102041 1690102041
1x Precision filling piece for one precision turntable.
Required quantity per turntable: 2
