Expand/collapse all

• Printer for Beissbarth trolleys 1693770415 1693770415

  
• Storage kit | for 4x Q.Grip 1690801048 1690801048

  Can be either mounted to the wall or to the post of the Q.Lign T.41 wheel aligner. The storage kit holds 2x2 Q.Grip clamps. Can be positioned on each side of the vehicle for maximum efficiency.

  
• Dust cover target board | Q.Lign 1690202155 1690202155

  Scope of delivery: 1x protective cover

  
• Magnetic clamps for wheel bolts | 100mm 1690701521 1690701521
  • Quick and gentle attachment on wheel bolts instead of the rim
  • Secure and central hold for ultimate precision
  • Suited for 3/4/5/6 hole rims

  
• Magnetic clamps for wheel bolts | 75mm 1690701508 1690701508
  • Quick and gentle attachment on wheel bolts instead of the rim
  • Secure and central hold for ultimate precision
  • Suited for 3/4/5/6 hole rims

  
• ADAS target boards | for Q.Lign 1690200013 1690200013

  For ADAS calibration in combination with Q.Lign. Target boards can be permanently installed on the ADAS calibration tool.
  Scope of delivery:

  • 2x ADAS target boards (Coding ID #5 and #6)
  • 2x target covers

  Compatible with BBFAS1000 and most third-party ADAS calibration tool solutions.

  
• Adapter set Q.Grip | for Q.Lign | 4 pcs. 1690101010 1690101010

  Q.Grip: The closest you will get to Touchless.

  • Mounting of targets in under 5 seconds
  • No rim contact, no scratches or damages!
  • Instantaneously change between different tyre diameters with our new patented clamping mechanism
  • Three arms guarantee safe and precise grip during the complete alignment
  • No removal of hubcaps!
  • No knob twisting!
  • No fixed wheel assignment, position on any wheel!
  • Clamping range: 525-835mm / 20.6"-32.8" (wheel diameter)

  
• Trolley with 27"monitor | for Q.Lign 1690201055 1690201055

  Scope of delivery: - Trolley - Monitor arm - 27" monitor

  
• Wall board for Q.Lign 1690201054 1690201054

  
• Tablet | Android | 10.1" 1693770644 1693770644

  Incl. protection case

  
• Lift adaptation for Q.Lign 1690201035 1690201035

  2x required for Q.Lign

  
• Emergency power box for Q.Lign 1690201030 1690201030
  • Power supply of sensor heads in case of battery failure
  • Mobile use without fixed installation
  • Connection to sensor heads via 10 m (1690203025) or 15 m cable (1690203041)

   

  Note: Operation additionally requires the 19 V power supply (1693770648) which is included in the battery-powered Q.Lign scope of deliveries.

  
• Power supply for Q.Lign Accessories | 19 V RRC 1693770648 1693770648

  For battery charging station and emergency power supply box of Q.Lign

  
• Filling piece (1x) for aluminum turntable 1690102211 1690102211

  
• Mounting set for MultiFit (4x) | for wall installation 1690101094 1690101094

  
• Lift Adaptation Extension (1x) | for wide vehicles on narrow lifts 1690202173 1690202173

  Extension for Q.Lign lift adaptation, for measuring wide vehicles on narrow lifts. 2x required per wheel aligner.

  
• Mouse and keyboard | Wireless 1693770634 1693770634

  
• Wheel chock set 2 pcs. 1692000156 1692000156

  Scope of delivery:

  • 2 x Wheel chock

  
• Filling piece for aluminum precision turntable 1690102041 1690102041

  1x Precision filling piece for one precision turntable.
  Required quantity per turntable: 2

  
• Inclinometer and steering wheel level | Mercedes-Benz 1690102231 1690102231

  Mercedes-Benz Inclinometer Combo-Instrument:

  • Measurement: Measurement of the inclination of the control arm and drive shaft with electronic data transfer of measured values to the wheel aligner.
  • Includes: Includes all mounting adapters for the most common Mercedes-Benz models.
  • Function: After the inclination measurement, the inclinometer is inserted into the steering wheel to monitor the steering wheel position throughout the entire alignment process.
  • Reporting: Automatic transfer of the steering wheel position into the measurement report.

  Included adapters for the following vehicles:
  

  • Cavity adapter: Mercedes E-Class (on the control arm)
    
  • Crown adapter: Mercedes A-Class, C-Class, S-Class, E-Class (Type W210 and W211), CLA-Class (Type 117), Citan (Type 415, rear axle only)
    
  • Angle adapter: Mercedes Vaneo (Type 414, 2001–2005)
    
  • Measuring adapter: Mercedes Citan (Type 415, front axle only)
    
  • Adapter plate: Mercedes CLK (Type 208, 1997–2003), C-Class (Type 202, 1993–2001)

  Technical Data:

  • Measuring range: ±45∘ from the horizontal
    
  • Accuracy: 0.1∘ in the range from 0∘ to ±45∘
    
  • Repeatability: ±0.1∘
    
  • Operating temperature range: 0∘C to 50∘C
    
  • Power supply: 3 x 1.5V AA batteries / Service life approx. 20 hours in normal operation at approx. 50% display brightness
    
  • Bluetooth: 5.2 Low Energy connectivity
    
  • Weight: 550 grams (without adapter)

  
• Bracket set for magnetic clamps (4x) | for wall installation 1690101092 1690101092

  
• Accessory Cart | for Magnetic Clamps 1690101128 1690101128

  For storing 4x magnetic clamps, brake lock, and steering wheel lock

  
• Vehicle database update Q.Lign | Key Card 1690002022 1690002022
  • Access to the newest vehicles specs directly from the OEM
  • Authorises the licensing of all IAM vehicle databases for the calender year in which the Key Card has been activated

  
• Accessory cart | MultiFit clamps 1690101129 1690101129

  For storing 4x MultiFit clamps, brake locks, and steering wheel locks

  
• Accessory cart | for OE quick clamps 1690101127 1690101127

  For storing 4x OE quick clamps, brake locks, and steering wheel locks

  
• Mounting set for brake and steering wheel lock (2x) | for wall installation 1690101089 1690101089

  
• Mounting set for OE quick clamps (4x) | for wall installation 1690101090 1690101090

  
• Battery for Q.Lign | Li-Ion | 99 Wh 1690203053 1690203053

  
• Duo-battery charging station for Q.Lign | incl. accessories 1690201069 1690201069

  
• Drive-on ramps for turntables and sliding plates 1690401008 1690401008
  • Set of Drive-on ramps for turntables and sliding plates
  • Suitable for lifts without cutouts for turntables or sliding plates, e.g. MOT lifts

  
• Drive-on ramps for two aluminum turntables 1690701052 1690701052
  • Drive-on ramps for turntables including connecting piece and drive off protection
  • Enables rolling compensation on lifts without embedded turntables

  This product is suitable for two turntables.

  
• Protective rubber cover for aluminum turntable 1690402001 1690402001
  • Additional protection from dirt and liquids

  
• Electronic aluminum turntable without connecting cable | Standard 1690401011 1690401011
  • Enables full steering lock on CCD and Touchless aligner
  • Very high quality and lifetime in workshop environment
  • Standard turntable without connecting cable

  
• Sliding plate for rear axle | long 1690401004 1690401004
  • +/-2.5° rotating range

  
• Sliding plate for rear axle | short 1690401003 1690401003
  • +/- 10° rotating range

  
• Set truck claws for 1 x Multi-fit clamp | Truck 1690311115 1690311115

  For convex wheels mounted to a double-bearing hub and dually wheels.

  Length: 10cm

  
• Set softline claws for 1 x Multi-fit clamp | Softline rims 1690311164 1690311164

  
• Extension set for Multi-fit clamps | 23 - 28" 1690311113 1690311113

  
• Multi-Fit wheel clamp with standard claws | 13 - 22" | 1pc. 1690311089 1690311089
  • High quality claws for gentle attachment to rims
  • Torque control for strong hold without deforming the rim

  
• Multi-Fit wheel clamp with standard claws | 13 - 22" | 4 pcs. 1690311112 1690311112
  • High quality claws for gentle attachment to rims
  • Torque control for strong hold without deforming the rim

  
• Mechanical aluminum turntable Precision 1690401028 1690401028
  • Very high quality and lifetime in workshop environment
  • Steel balls for minimal friction and maximum precision

  
• Adapter for Consul alignment lifts | for Q.Lign and Easy3D 1690701311 1690701311
  • Used to attach Beissbarth lift adapters to wheel alignment lifts without straight side walls
  • Suitable for Easy 3D lift adapter 1690701231
  • Suitable for Q.Lign lift adapters 1690201122 and 1690201035
  • Fits Beissbarth lifts VLH 4245 and VLH 4345, as well as Consul 4-post lifts with wheel alignment kit

  
• Electronic aluminum turntable without connecting cable | Precision 1690401013 1690401013
  • Enables full steering lock on CCD and Touchless aligner
  • Very high quality and lifetime in workshop environment
  • Precision turntable without connecting cable
  • Steel balls for minimal friction and maximum precision

  
• Power connection cable 15 m 1690203041 1690203041

  
• Power connection cable 10 m 1690203025 1690203025

  
• Distance bolts for quick clamp Mercedes Benz and BMW | 125 mm 1690401019 1690401019
  • For one quick clamp

  
• Distance bolts for quick clamp BMW | 120 mm 1690801003 1690801003
  • For one quick clamp

  
• Distance bolts for quick clamp Mercedes Benz | 100 mm 1690801007 1690801007
  • For one quick clamp

  
• Quick clamp BMW | OEM 1690801001 1690801001
  • Distance pins sit directly on the wheel hub, a runout compensation is therefore not necessary
  • Quick and secure mounting on the vehicles
  • For ultimate precision
  • Homologated for BMW
  • Only suited for CCD and Q.Lign systems
  • Für Raddurchmesser bis 850mm
  • For original BMW rims with 4x100mm and 5x120mm pin hole pattern

  
• Quick clamp Mercedes-Benz | OEM 1690801002 1690801002
  • Distance pins sit directly on the wheel hub, a runout compensation is therefore not necessary
  • Quick and secure mounting on the vehicles
  • For ultimate precision
  • Only suited for CCD and Q.Lign systems
  • For wheel diameters up to 850mm
  • For original Mercedes-Benz rims with pin hole pattern 5x125mm and 5x160mm

  
• Self-centering quick clamp for Ferrari 1690381299 1690381299
  • Attaches to the center hole of the rim
  • Quick and secure mounting on the vehicle
  • Reduces clamping errors
  • Used for wheel alignment and radar calibration - Wheel alignment requires 2 sets (4 clamps in total) - Radar calibration requires 1 set (2 clamps in total)

  
• Self-centering quick clamp for Tesla 1690380161 1690380161
  • Attaches to the center hole of the rim
  • Quick and secure mounting on the vehicle
  • Reduces clamping errors

  
• Self-centering quick clamp VAS 6918 for Porsche ASE 485 237 00 000 ASE 485 237 00 000
  • Attaches to the center hole of the rim
  • Quick and secure mounting on the vehicle
  • Reduces clamping errors
  • Official VW special tool: VAS 6918
  • Not suited for Porsche vehicles with center wheel bolt!

  
• Central Clamp VAS 6830 | Porsche 911 GT3 and Turbo ASE 485 233 00 000 ASE 485 233 00 000
  • Special tool for Porsche 911 Turbo since 2009 and Porsche 911 GT3 since 2010
  • Quick and secure mounting on the vehicle
  • Reduces clamping errors
  • Official VW special tool: VAS 6830

  
• Central Clamp VAG 6828 | Porsche Carrera GT 1690301002 1690301002
  • Quick and secure mounting on the vehicle
  • Reduces clamping errors
  • Official VW special tool: VAG 6828

  
• Mechanical aluminum turntable Standard 1690501001 1690501001
  • Very high quality and lifetime in workshop environment

  

• Broschüre
  TVA_QLIGN_brochure_12p_1289_EN_2023_11_13.pdf