We measure where others are just guessing.
Precision at the highest level.
Optical diagnostic system for automated tread depth measurement | incl. drive-on ramps for above ground installation and trolley with PC, mouse and monitor | without Easy Cam
Article number: 1 691 200 017
The tyres are the only contact points between a vehicle and the road. The quality of this bonds decides how safely the vehicle can be accelerated and braked. Especially aquaplaning can only be avoided by sufficient tread depth. This is why checking tread wear is a mandatory item of all statutory safety inspection. At the same time, uneven tread wear is a clear indication for a workshop that a wheel alignment should be considered - and that a wheel alignment check should be proposed to the customer.
With the Tyre Diagnostic System (in German "Reifen-Diagnose-System" - RDS), the way the tyres are systematically checked during the vehicle reception is standardized, and thus clearly facilitated. All four wheels are automatically and quickly measured and the result is displayed before the vehicle driver gets out of the car. With the measured tread depths of the tyres immediately available, it is much more easier for the workshop owner to advice the vehicle owner. Positive results given by professional tests, contribute to customer fidelity. The results can be stored in a Windows based system for further references.
The measuring units and the drive-on ramps are anchored to the ground, which makes the installation easy.
Can also be configured as inground version!
Version without trolley: 1691200019
|License plate recognition Easy Cam | Above ground||1 691 200 008|
|Cable tunnel | for onground installations of Easy Tread||1 691 201 023|
|Centre cover Easy Tread and VAS 741083 RDS||1 691 202 069|
|Foundation frame for Easy Tread and VAS 741083 RDS||1 691 200 010|
|License plate recognition Easy Cam | Inground||1 691 200 009|
Three cable tunnels needed for onground installations without Easy Cam, only two required for installations with Easy Cam.