| Lunghezza dell'imballaggio | 2420 mm |
|---|---|
| Larghezza dell'imballaggio | 820 mm |
| Altezza dell'imballaggio | 700 mm |
| Peso lordo | 476 kg |
| Lunghezza | 660 mm |
| Altezza | 250 mm |
| Larghezza | 2360 mm |
| Dimensione max. ruota | 1000 mm |
| Diametro max. cerchione | 32 " |
| Sistema di misura | DMS |
| Lunghezza rulli | 700 mm |
| Elevazione rulli | 25 mm |
| 10 mm | |
| Diametro rulli | 205 mm |
| Carreggiata minima del veicolo | 800 mm |
| Carreggiata massima del veicolo | 2200 mm |
| Dimensione min. ruota | 320 mm |
| Interasse rulli | 381 mm |
| Peso | 446 kg |
| Velocità nominale di prova | 5 km/h |
| Peso asse max. | 4,0 t |
| Max. carico carrabile | 4,0 t |
| -10 mm |
| Lunghezza dell'imballaggio | 2420 mm |
|---|---|
| Larghezza dell'imballaggio | 820 mm |
| Altezza dell'imballaggio | 700 mm |
| Peso lordo | 476 kg |
| Lunghezza | 660 mm |
| Altezza | 250 mm |
| Larghezza | 2360 mm |
| Dimensione max. ruota | 1000 mm |
| Diametro max. cerchione | 32 " |
| Sistema di misura | DMS |
| Lunghezza rulli | 700 mm |
| Elevazione rulli | 25 mm |
| 10 mm | |
| Diametro rulli | 205 mm |
| Carreggiata minima del veicolo | 800 mm |
| Carreggiata massima del veicolo | 2200 mm |
| Dimensione min. ruota | 320 mm |
| Interasse rulli | 381 mm |
| Peso | 446 kg |
| Velocità nominale di prova | 5 km/h |
| Peso asse max. | 4,0 t |
| Max. carico carrabile | 4,0 t |
| -10 mm |
Already available in some of SW Kits, but also can be sold separatly
Edge protection for single brake tester with 700 mm roller length
Installation frame for single brake tester with 700 mm roller length
4 sensors used to determine vehicle axle load
This solid support is used to adjust the screws of the axle load weighting sensors
for smoother start of brake tester operation | for countries using 400 V
Extention cable for connecting the Power-Box to roller set
Scope of delivery for all analogue displays | Can also be ordered separately to mount the TV monitor on the wall (Additional TV adapter for stand column / swivel arm (item no. 1 691 812 325) required!)
Moving trolly enables the best arrangement and positioning of all PC components | Empty trolly! To add PC component you can additionally order 1 691 810 743.
Includes only the monitor holder (Monitor not included)
Includes only the monitor holder (Monitor not included)
Digital calibration kit with transport suitcase, digital sensor and calibration manual
Already available in some of SW Kits, but also can be sold separatly | incl. Battery
Enabels flexibility of the IR receiver position (up to 10 m)
Full PC equipment | incl. PC, monitor, monitor holder, mouse, keyboard and printer
Alternative to wall mounting, mounting solution for TV monitors or square analogue displays | TV adapter for stand column / swivel arm (item no. 1 691 810 722) is also required to attach a TV monitor!
Alternative to wall mounting of the Power-Box (included with all brake testers)
Pluggable drive-over plate for roller set with 700 mm (2 pices)
Swiveling drive-over plate for roller set with 700 mm (2 pieces)
Computer interface kit for installation into the new control cabinet, direct connection to the computer via USB cable (up to 1.5 m), USB board for control cabinet, USB cable, ICperfrom Garage Car Software License and Tablet App License (not for test lane)
Computer interface kit with BUS cable for larger distances (standard 15 m, optional 30 m), USB box, USB cable, Icperform Garage Car Software License and Tablet App License (not for test lane)
Computer interface kit for installation into the new control cabinet, direct connection to the computer via USB cable (up to 1.5 m), USB board for control cabinet, USB cable, remote control and receiver, ICperform Garage Car Software License (not for test lane) | Prerequisite: serial PC interface (COM) for the operation of the receiver
PC connection kit with BUS Cable for long distances (standard 15 m, optional 30 m), USB-Box, USB cable, Remote control, ICperform Garage Car Software License (not for test lane) | Prerequisite: serial PC interface (COM) for the operation of the receiver
incl. Battery
Alternative to wall mounting, mounting solution for TV monitors or oval analogue displays
for stand column (1 691 600 470)
TV mount for wall mounting on the swivel arm (item no. 1 691 601 959) or for floor mounting with stand column (item no. 1 691 810 722)
