Mounting type: Manual / Pneumatic
Suitable for wheel type: Passenger car / light truck
Required for: Extending the flange plate for off-road wheels or wheels with a high offset to prevent contact with the wheel balancer housing.
Application: The spacer ring is attached to the flange plate using three magnetic pins. The spacer sleeve is mounted on the balancing shaft in front of the centering cone and wheel.
Quantity: 1
Required quantity per wheel: 1
Not suitable for: Wheels without a center bore
Wheel balancer for passenger cars, designed by professionals for professionals, with fully automatic wheel detection:
Measuring and Balancing
- Balancing in 4.7 seconds
- Stops wheel automatically in exact correction position
- LED for increased visibility when placing weights
- Internal laser point for precise weight positioning
- External line laser for clip-on weights
- Split program for hiding weights behind spokes
3D Laser Scanner
- Contactless measurement of distance, rim width, and rim diameter
- Optimized for black and glossy rims
- No data arm or measuring gauge, everything fully automatic
Wheel Data Detection
- Fully automatic wheel data detection
- Automatic selection of clip-on and adhesive weights program
- Highest measurement accuracy of +/- 0.5g
- Balancing program starts automatically when closing the wheel guard
Auto Adaptive Mode
- Dynamic tolerance adjustment based on weight and size
- Minimizes remaining imbalance to eliminate smallest vibrations noticeable by the driver
Wheel guard with integrated sonar
- Automatic recognition of rim width in steel and aluminium rims
- Without manual input with measuring gauge
- Closing of wheel guard automatically starts balancing program
19" touchscreen monitor
- Graphical step-by-step illustrations
- Simplifies correct balancing with guided processes
- Touchscreen usbale with gloves on
Secure pneumatic clamping
- Pneumatic clamping with 250kg clamping force
- Ensures consistent clamping for all four wheel
- Wheel weights up to 75kg
- Optional with wheel lift
One Plane Balancing
- Eliminates dynamic imbalance with only one weight instead of two
- Fewer correction positions on the rim
- Less consumption of weights
Optional upgrade: Diagnostic function with VAS 741 119/2
- Automatic height deviation measurement with every balancing operation (4.7 seconds)
- Hubmatch: eliminates vibrations by rotating the tire on the wheel
- Eliminates even the slightest vibrations without the need for an expensive roller
Lieferumfang
- 4 cones Ø43-112,5mm
- Pneumatic quick lock sleeve
- Clamping cap for aluminum rims
- Pressure ring
- Rubber ring
- 60g counterweight
- Weight pliers
| Electrical connection | 230 V | 50 - 60 Hz | 1 ph |
|---|---|
| Packaging length | 1480 mm |
| Packaging width | 1130 mm |
| Packaging height | 1165 mm |
| Length | 1300 mm |
| Height | 1770 mm |
| Width | 1300 mm |
| Max. wheel diameter | 1117 mm |
| Max. rim diameter | 30 Inch |
| Min. rim diameter | 10 Inch |
| Weight | 130 kg |
| Motor power | 0,15 kW |
| Max. rim width | 20 Inch |
| Max. wheel weight | 75 kg |
| Measuring speed | 100 rpm |
| Measuring time | 4 s |
| Balancing accuracy +/- | 0 g |
| Min. rim width | 1 Inch |
| Shaft diameter | 40 mm |
| Stackable | 2 Piece(s) |
| Units per 20ft container | 13 Piece(s) |
| Units per 40ft container | 30 Piece(s) |
| Air supply | 7 - 10 bar |
| Electrical connection | 230 V | 50 - 60 Hz | 1 ph |
|---|---|
| Packaging length | 1480 mm |
| Packaging width | 1130 mm |
| Packaging height | 1165 mm |
| Length | 1300 mm |
| Height | 1770 mm |
| Width | 1300 mm |
| Max. wheel diameter | 1117 mm |
| Max. rim diameter | 30 Inch |
| Min. rim diameter | 10 Inch |
| Weight | 130 kg |
| Motor power | 0,15 kW |
| Max. rim width | 20 Inch |
|---|---|
| Max. wheel weight | 75 kg |
| Measuring speed | 100 rpm |
| Measuring time | 4 s |
| Balancing accuracy +/- | 0 g |
| Min. rim width | 1 Inch |
| Shaft diameter | 40 mm |
| Stackable | 2 Piece(s) |
| Units per 20ft container | 13 Piece(s) |
| Units per 40ft container | 30 Piece(s) |
| Air supply | 7 - 10 bar |
-
Universal Distance Ring (L=36mm) | Including Spacer Sleeve (L=35mm) | for Off-Road Wheels a Rims With High ET 1695901667 1695901667
-
DuoExpert Collet Set | Set of 3 | 54 - 78 mm 1695656698 1695656698
Center Bore Diameter: 54–78 mm
Clamping Type: Manual / Pneumatic
For Wheel Type: Passenger Cars
Required For: Mounting via the wheel center bore. Covers approximately 95% of common passenger cars.
Application: Wheels should be clamped from the inside using the cone.
Use In Combination With: Stand-alone (optimal results with type-specific clamping plate or Quick Plate)
Quantity: 1 Set with 3 collets
Required Quantity per Wheel: 1
Not Suitable For: Wheels without a center bore
-
Wheel lift VAS 741 119/1 | with memory function 1692502191 1692502191
Zero Gravity - The Wheel Lift for Professionals
- Pneumatic lifting and lowering of wheels up to 80kg
- Automatic lowering of lift upon closing the wheel guard
- Weightless: Automatic weight compensation for easy and secure clamping
- Memory function: Automatically adjusts to the correct height for the next wheels
- Faster than comparable solutions
- Effortlessly adjustable in height and sideways.
- Low height for easy rolling of heavy tires onto the lift
Note: The automatic lowering function upon closing the wheel guard requires both a pneumatic and an electronic connection to the wheel balancer. This is only compatible with Beissbarth wheel balancers VAS 741 113, VAS 741 115 and VAS 741 119.
-
Eccentricity Diagnostic Upgrade VAS 741 119/2 | for VAS 741 115 and VAS 741 119 1692502207 1692502207
Diagnostic upgrade with a rear sonar to enable eccenticity measurements. This advanced feature determines the roundness of the wheel assembly when rotating. Additionaly, the newly unlocked Hubmatching feature allows rotating the tyre on the rim to minimize total imbalance before applying correction weights.
-
QuickPlate | 5-Holes | 96 - 186 mm | 48mm & 58mm 1695655296 1695655296
Mounting type: Manual / Pneumatic
For wheel type: Passenger car / Light truck wheels with 5-lug bolt pattern
Required for: Clamping the wheel externally through the five bolt holes
Application: Wheels are centered and mounted externally through the bolt holes using the QuickPlate.
For use with:- ProGrip quick clamping nut and pressure ring
- Threaded handle (1692502209) for pneumatic clamping
Quantity: 1
Required quantity per wheel: 1
