Required for installation without mounting frame
Fully automatic suspension tester detects technical defects in shock absorbers, wheel suspension, wheel bearings and tires.
- Fully automatic determination of road grip, axle weight and total weight
- Measurement begins when the vehicle is put on the tester
- Direct integration of results into the QB.4 brake tester
- Fully hot-dip galvanized
Can also be operated in stand-alone mode, without a complete brake tester or PC! Easily done using the 230V control cabinet (1691401120); display options are flexible via an Android tablet or the TV display kit (1691403100)!
- QS.4 suspenion tester
- Connecting cable
| Operating temperature | -10 - 50 °C |
|---|---|
| Electrical connection | 400 V | 50 - 60 Hz |
| Storage temperature | -10 - 50 °C |
| Gross weight | 343 kg |
| Length | 440 mm |
| Height | 280 mm |
| Width | 2360 mm |
| Measuring system | DMS |
| Weight | 313 kg |
| Packing | 2420 x 820 x 700 mm |
| Max. axle load testable | 2000 kg |
| Relative humidity max. | 85 % |
| Fuse protection | 3 x 20 A |
| Max. drive-over load | 4000 kg |
| Max. sound pressure level | 70 dB(A) |
| Test width min. - max. | 820 - 2200 mm |
| Test frequency | < 25 Hz |
| Motor power | 2 x 2,5 kW |
| Engine speed | 1360 rpm |
| Supply lead | 5 x 2,5 mm² |
| Test principle | - Excitation method (EUSAMA principle) |
| Test plate length | 690 mm |
| Test plate width | 273 mm |
| Measuring range, max. stroke | 6 mm |
| Operating temperature | -10 - 50 °C |
|---|---|
| Electrical connection | 400 V | 50 - 60 Hz |
| Storage temperature | -10 - 50 °C |
| Gross weight | 343 kg |
| Length | 440 mm |
| Height | 280 mm |
| Width | 2360 mm |
| Measuring system | DMS |
| Weight | 313 kg |
| Packing | 2420 x 820 x 700 mm |
| Max. axle load testable | 2000 kg |
| Relative humidity max. | 85 % |
| Fuse protection | 3 x 20 A |
| Max. drive-over load | 4000 kg |
|---|---|
| Max. sound pressure level | 70 dB(A) |
| Test width min. - max. | 820 - 2200 mm |
| Test frequency | < 25 Hz |
| Motor power | 2 x 2,5 kW |
| Engine speed | 1360 rpm |
| Supply lead | 5 x 2,5 mm² |
| Test principle | - Excitation method (EUSAMA principle) |
| Test plate length | 690 mm |
| Test plate width | 273 mm |
| Measuring range, max. stroke | 6 mm |
-
Installation kit for suspension tester SA 640 / SN 680 / QS.4 1691621001 1691621001
-
TV display kit | QB.4 1691403100 1691403100
Used for displaying the braking force on a TV. The QB.4 Android app runs on an Android stick that is plugged directly into the TV. The app is operated via a small remote control. This means that any television can be used to display and control the app, without any licenses, activations or intermediate PCs. Includes power supply unit, remote control and accessories.
Important: TV not included!
-
Cable set BNet-Cable | Power-Box to suspension tester | 30 m 1691602557 1691602557
Extention cable for connecting the suspension tester and the Power-Box if the cable set supplied with the chassis tester (15 m) is not sufficient to bridge the distance
-
Cable set 400 V | Power-Box to suspension tester | 30 m 1691603369 1691603369
Extention Cable for connecting the suspension tester and the Power-Box if the cable set supplied with the chassis tester (15 m) is not sufficient to bridge the distance
-
Height spacer for BD 4xxx / QB.4 in combination with SA 640 / SN 680 / QS.4 1691601109 1691601109
Height spacer to place under the brake tester when installed in combination with a EUSAMA suspension tester and the installation frame (P/N 1691602002)
-
Clamp set for EUSAMA suspension tester 1691621000 1691621000
Required for installation into installation frame (item no. 1 691 602 002)
-
Installation frame for test lane with EUSAMA suspension tester 1691602002 1691602002
Installation frame for a combination of brake tester and EUSAMA suspension tester
-
Edge protector for test lane TL / SL 6xx 1691602001 1691602001
Edge protection for a combination of brake tester and EUSAMA suspension tester
-
Edge protection for suspension Tester SA 640 / SN 680 / QS.4 1691622002 1691622002
-
Drive over ramp to replace suspension tester SA 640 / SN 680 / QS.4 1691621026 1691621026
Special cover for filling the gap created when the suspension tester is installed later.
-
Positioning ramps for suspension tester SA 640 / SN 680 / QS.4 1691621017 1691621017
Required quantity: 1x
-
Control Unit 230V | for using QS.4 in stand-alone mode 1691401120 1691401120
Note: To use the QS.4 without the QB.4 brake tester, firmware version V201.3 is strictly required! Display options are flexible via an Android tablet or the TV display kit (16914013100)!
