The AXL 2500 enables brake testing on tandem axles and dual-axle trailers. It lifts the entire brake tester out of the floor, ensuring that the axle being tested maintains full contact with the rollers and is not suspended due to the adjacent axle remaining on the ground.
Features
- Reliable testing conditions: Prevents axle lift-off and ensures the roller contact required for accurate brake measurement.
- Geometry maintained: Synchronous lifting of the brake tester preserves the alignment of the rollers.
- Optimized workflow: No manual compensation ramps or wheel chocks required.
- Flush-mounted installation: Retracts flush into the workshop floor when not in use.
Compatibility:
- Suitable for all passenger car brake testers in the BD6xx, BD4xxx, and QB.4 series with a 2,800 mm testing width.
- Integrated load cells of the brake tester can continue to be used without restriction, even when the roller set is raised.
- The edge protection frame is integrated directly into the lifting device and does not need to be ordered separately.
Pit dimensions with roller set lift (L × W × D): 2,980 × 670 × 380 mm
